1 Grade:
PP block copolymer: : Injection moulding, PP block copolymer: : Pipe extrusion, PP block copolymer: : Sheet extrusion, PP block copolymer FLOWPACT: : Injection moulding, PP controlled morphology CLEARPACT: : Injection moulding, PP controlled morphology CLEARPACT: : Thermoforming, PP high crystallinity: : Automotive injection moulding, PP homopolymer: : Bi-axially oriented film, PP homopolymer: : Cast film, PP homopolymer: : Fibre, filament and tape extrusion, PP homopolymer: : Healthcare, PP homopolymer: : Injection moulding, PP homopolymer: : Pipe extrusion, PP homopolymer: : Thermoforming, PP Homopolymer FLOWPACT: : Injection moulding, PP impact: : Automotive injection moulding, PP random: : Automotive injection moulding, PP random copolymer: : Blow moulding, PP random copolymer: : Cast film, PP random copolymer: : Healthcare, PP random copolymer: : Injection moulding, PP random copolymer: : Sheet extrusion, PP random copolymer QRYSTAL: : Injection moulding, PP super high impact: : Automotive injection moulding
2 Application:
Exterior application, Houseware & appliances, Caps & closures, Crates & boxes, Thin wall packaging, Bottles & cans, Cast PP film, Under the bonnet application, Thin wall packaging, woven bag, BOPP film, Sheet Sewage Waste water pipe, Tapes & strapping, Containers & pails
Properties |
Unit |
Test method |
Value |
Melt Flow Rate |
|
|
|
Melt flow rate(230°C/2.16KG) |
g/10min |
ISO 1133 |
12 |
Mechnical Properties |
|
|
|
Tensile modulus of elasticity(v=1mm/min) |
Mpa |
ISO 527-2 |
1550 |
Tensile yield at stress(v=50mm/min) |
Mpa |
ISO 527-2 |
35 |
Tensile yield at strain (v=50mm/min) |
% |
ISO 527-2 |
8 |
Tensile strain at break (v=50mm/min) |
% |
ISO 527-2 |
>50 |
Charpy impact strength unnotched(+23°C) |
kJ/m2 |
ISO 179/1eU |
110 |
Charpy impact strength notched(+23°C) |
kJ/m2 |
ISO 179/1eA |
3 |
Izod Impact strength notenched(+23°C) |
kJ/m2 |
ISO 180/1A |
3 |
Ball indentation hardness(H 358/30) |
Mpa |
ISO 2039-1 |
78 |
Thermal Properties |
|
|
|
Melting point,DSC |
°C |
ISO 3146 |
163 |
Heat deflection temperature (0.45Mpa) |
°C |
ISO 75-2 |
85 |
Vicat softening temperature VST/A50(10N) |
°C |
ISO 306 |
154 |
Other Properties |
|
|
|
Density |
g/cm3 |
ISO 1183 |
0.91 |